|
RISE: the rapid sealing system
RISE is the system of choice for the fire safe and gas, smoke and watertight
sealing of multi-cable and pipe penetrations. The RISE system offers the most
cost-effective way of installation. The system is easy to handle on site and
can be used both for vertical (deck) and horizontal (bulkhead) conduit openings.
|
The severity of testing undergone world-wide by the RISE system is unmatched by
any other system. On this basis it has been awarded certificates guaranteeing
optimized fire safety. RISE allows you to add or remove cables in a later stage
without disassembling the whole penetration.
With RISE no pre-engineering is needed, no special conduit frames have to be
used, there are no restrictions on cable types and sizes, insulation in front
of the penetration is not needed ánd the system can be used for the shortest
possible conduit length. |
 |
|
RISE
multi-cable transits consist of only two components
The
rubber sleeves have been developed for the RISE system.
Exposed to fire or high temperatures, this rubber will
expand to five times its original volume. During the
expansion a carbonised mass is formed, which has good
thermal insulation properties. The RISE rubber is
absolutely halogen free and has a low smoke and a very
high oxygen index.
FIWA is a fire-resistant and water repellent sealant
based on a single component silicone compound. In the
event of fire or at high temperatures the sealant
expands to about 10 times its original volume.
The porous mass that is formed has excellent thermal
insulation properties. FIWA is absolutely halogen free
and has a low smoke index, a high oxygen index and low
flame spread characteristics. |
 |
|
|
The RISE system offers many advantages
The system offers the most simple way of installation while
the very limited amount of components makes it easy to
handle on site. RISE can be used both for vertical (deck)
and horizontal (bulkhead) conduit openings.
The sealing system allows cables to be ducted through
conduit openings in a bent, curved or oblique way. Without
any adverse impact on the sealing performance.
An important feature is the possibility to add or remove
cables in a later stage without disassembling the whole
penetration. But there is more.
|
|
With RISE no pre-engineering is needed, no special conduit
frames have to be used, there are no restrictions on cable
types and sizes, insulation in front of the penetration is
not needed ánd the system can be used for the shortest
possible conduit length.
RISE: the safe, simple and cost-effective rapid transit
system.
Visit our website www.rise-systems.com
for a complete presentation of the Rapid Transit System.
|
|
|
|
BEELE Engineering is synonymous with a continuous flow of new products and constant improvement of existing systems in the field of fire safety and evacuation safety.
In support of this we have our own, unique R&D centre. Here our comprehensive knowledge of fire safety and evacuation safety is translated into state-of-the-art
products.
Please contact us at:
T: +31(0)543 461629
F: +31(0)543 461786
E:
I:
|
|
SLIPSIL sealing plugs