|
 |
SLIPSIL - new generation sealing plugs
SLIPSIL, the new generation sealing plugs developed by BEELE Engineering, is designed
to provide fire safe and gas and water tight seals for transits carrying single or
multiple plastic or metal pipes.
Compared with other sealing plugs the SLIPSIL plug is even easier to install. The new
design of the plug simplifies the installation and improves the tightness. The plugs can
already be exposed to high pressures immediately after installation. Due to the new
design much wider tolerances of ducted pipes and conduit sleeves can be adopted.
Optimized gas and water tightness is obtained by using the SLIPSIL sealing plugs in CSD embedded or flanged
pipes. The sealing plugs also can be used in holes bored with diamond-tipped
drills. The tolerances of the drilled hole should be within the tolerances of the plug series.
SLIPSIL offers the advantage of having one rubber type for most applications.
|
 |
|
SLIPSIL is made of the superior rubber grade NOFIRNO
and is developed by BEELE Engineering. NOFIRNO is a rubber compound that is
not consumed by fire, does not shrink, and when exposed to flames forms a protective
layer with a layer of char underneath. NOFIRNO rubber has excellent weathering
properties, UV and ozone resistance and long term behaviour. Service life of the plugs easily exceeds 20 years under normal environmental
conditions.
The plugs can be used in a very wide temperature range. Even at low
temperatures down to -50° C the rubber stays flexible and does not harden excessively as
other rubber types will do. This guarantees tightness even at low
temperatures.
The rubber can also be used in applications up to +180° C.
A single rubber grade is now capable of satisfying almost all sealing
conditions.
|
|
The SLIPSIL plugs can be exposed to fairly high pressure loads directly after
installation. For optimum tightness on long
term, the design and position of the profiles on the plugs is a determining factor. Also the quality of the used polymer and the hardness and compression set of the vulcanized rubber is most important.
Typical areas of application of the SLIPSIL plug are the
construction industry, shipbuilding and the offshore sector, the oil refining and
(petro)chemicals industry, and the utilities industry.
|
Why using SLIPSIL?
Using SLIPSIL offers advantages for the builder, the installer and the owner of the
installation. The innovative design of the plug allows the shortest possible sleeve length for fire
rated penetrations, and therefore reduces welding and cutting time. With SLIPSIL the
necessary insulation is reduced to an absolute minimum, while the plug can be used
for all types of metallic and plastic pipes. That simplifies material handling and
reduces the costs of storage.
Installing the plug is extremely simple. The SLIPSIL plugs can be installed in minutes
and do not require any bolting or other mechanical outfitting. SLIPSIL plugs cause no mechanical stress and avoid corrosion
problems. That offers
owners of ships or buildings the possibility to save on maintenance costs.
|
BEELE Engineering is synonymous with a continuous flow of new products and constant improvement of existing systems in the field of fire safety and evacuation
safety.
In support of this we have our own, unique R&D centre. Here our comprehensive knowledge of fire safety and evacuation safety is translated into state-of-the-art
products.
Please contact us at:
T: +31(0)543 461629
F: +31(0)543 461786
E:
I:
|
|
SLIPSIL sealing plugs